Additional Software Features - Enfora GSM2218 User Manual

3

Additional Software Features

The following software features are included in version 0.6.0 and greater:
A user can send AT commands, via SMS, to the MTG in the following format:
>RSP=[T/F];ID=[modem id];[at command]<
[T/F] field has to be set to either T or F. Setting of T indicates that the response to
an AT command will be sent back to the originator. Setting of F indicates that the
response to an AT command will be discarded
[modem id] field has to be the same value as AT$MDMID command setting. This
field is case-sensitive
[at command] field has to be set to an AT command from the below list:
Note: Please refer to the MT-G AT Command Set Document (GSM2000PB001MAN) for
detailed information on AT Command execution.
Please note the following information regarding sending AT commands via SMS:
•
AT commands sent via SMS have to originate from an address listed in the AT$SMSDA
command;
•
An incorrectly formatted SMS message will be processed as a regular SMS message;
•
Not having the originating address of the SMS message listed in AT$SMSDA command will
result in the SMS message being treated as a regular SMS message;
•
Query of an AT command setting that returns more than 160 bytes will result in data being
truncated to a maximum of 160 bytes.
GSM2218PB001MAN - GSM/GPRS MT-GL User Manual
Copyright 2005, Enfora L.P
•
AT$ACKTM
•
AT$ACTIVE
•
AT$APIPWD
•
AT$AREG
•
AT$CONNTO
•
AT$EVDEL
•
AT$EVDELA
•
AT$EVENT
•
AT$EVTIM
•
AT $FRIEND
•
AT$GPSRD
•
AT$IDLETO
•
AT$MDMID
•
AT$MSGLOGEN
•
AT$MSGLOGRD
•
AT$MSGSND
•
AT$PADBLK
•
AT$PADBS
•
AT$PADDST
•
AT$PADSRC
•
AT$PADTO
•
AT$PKG
•
AT$SMSDA
•
AT$UDPAPI
•
AT$WAKEUP
•
AT+CGDCONT
•
AT&W
Page 18