Others
Auto off
This system automatically turns off when you do not use it
for approximately 20 minutes.
1
Press [SETUP] repeatedly to select "AUTO OFF".
2
Press [R, T] to select "ON" and then press [OK].
To cancel, select "OFF".
Note:
This function does not work when you are in radio source or
when a Bluetooth
®
device is connected.
Bluetooth
standby
®
This function automatically turns on the system when you
establish a Bluetooth
1
Press [SETUP] repeatedly to select
"BLUETOOTH STANDBY".
2
Press [R, T] to select "ON" and then press [OK].
To cancel, select "OFF".
Charging a device
This system can supply power to a device, such as a
smartphone, connected to the USB port.
Note:
•
Use a cable compatible with the device.
•
Use the charger supplied with the device if power is not
supplied to the device.
•
Do not use a cable or connect a device that exceeds the
rated value of 5 V, 1.5 A.
•
Examine the screen of the device to check if charging is
complete. Disconnect the device after charging.
•
Once fully charged, remove the USB cable from the USB
port.
•
After the device has started charging, you can turn the unit
to standby mode.
–
When charging a depleted device, do not turn the unit to
standby mode until the device becomes operational.
•
Depending on the device, power may not be supplied to it.
•
Read the operating instructions of the device for details.
12
connection from a paired device.
®
Software update
Occasionally, Panasonic may release updated software
for this unit that may add or improve the way a feature
operates. These updates are available free of charge.
For more details, refer to the following website.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
█ Checking the software version
1
Press [SETUP] repeatedly to select "SW VER."
and then press [OK].
The software version is shown.
2
Press [OK] again to exit.