Table of Contents
Advertisement
Recalling the sound settings you have
saved
1
Press [SOUND] to select "MY SOUND".
2
Press [2, 1] to select the desired sound setting
number and then press [OK].
D.Bass
Press [D.BASS] to select "ON D.BASS" or
"OFF D.BASS".
≥ Alternatively, press [D.BASS] on the unit.
Preset EQ
Press [PRESET EQ] repeatedly to select "HEAVY"
(heavy), "SOFT" (soft), "CLEAR" (clear), "VOCAL"
(vocal) or "FLAT" (flat/off).
≥ When "PRESET EQ" is selected, Bass and Treble settings
will be changed to the settings in preset EQ setting.
Clock and Timer
Setting the clock
This is a 12-hour clock.
1
Press [CLOCK/TIMER] to select "CLOCK".
2
Press [3, 4] to set the time and then press [OK].
∫ To check the time
Press [CLOCK/TIMER].
≥ The clock is reset when there is a power failure or when the
AC power supply cord is removed.
≥ Reset the clock regularly to maintain accuracy.
Sleep timer
The sleep timer can turn the unit off after a set time.
Press [SLEEP] repeatedly to select the setting
(in minutes).
"SLEEP 30" -. "SLEEP 60" -. "SLEEP 90" -. "SLEEP 120"
^----------------
"OFF" (Cancel) (""""""}
≥ The remaining time is indicated on the unit's display at every
minute except when other operations are performed.
"SLEEP 1" is always shown when only 1 minute remains.
≥ The play timer and sleep timer can be used together. The
sleep timer is always the main timer on the unit.
12
TQBJ2179
Play timer
You can set the timer so this unit turns on at a certain
time every day.
Preparation
Set the clock.
1
Press [CLOCK/TIMER] repeatedly to select
"TIMER ADJ".
2
Press [3, 4] to set the starting time ("ON TIME")
and then press [OK].
3
Press [3, 4] to set the finishing time
("OFF TIME") and then press [OK].
4
Press [3, 4] to select the music source* and then
press [OK].
Turning the timer on
1
Prepare the selected music source and set the
desired volume.
2
Press [F, PLAY].
≥ "F" is displayed.
To cancel, press [F, PLAY] again.
3
Press [Í] to turn the unit to standby mode.
∫ To check the settings
Press [CLOCK/TIMER] repeatedly to select
"TIMER ADJ".
(During standby, press [CLOCK/TIMER] twice.)
≥ The timer starts at a low volume and increases gradually to
the preset level.
≥ The timer comes on at the set time every day if the timer is
on.
≥ If you turn off the unit and turn it on again while a timer is in
operation, the timer will not stop at the end time.
* "CD", "USB" and "FM" can be set as the music source.
Others
Auto off function
As a factory default, this unit will turn to standby mode
automatically if there is no sound and it is not being
used for approximately 20 minutes.
To cancel this function
1
Press [SETUP] repeatedly to select "AUTO OFF".
2
Press [2, 1] to select "OFF" and then press [OK].
≥ To turn the function on, select "ON" in step 2.
≥ This setting cannot be selected when radio is the source.
≥ When connected to a Bluetooth
not work.
device, the function does
®
Advertisement
Table of Contents
