Download Print this page

Seneca T203PM100-MU Installation Manual

Single-phase network analyzer

Advertisement

Quick Links

PRELIMINARY WARNINGS
The word WARNING preceded by the symbol
The word ATTENTION preceded by the symbol
instrument or the connected equipment. The warranty shall become null and void in the event of improper use or
tampering with the module or devices supplied by the manufacturer as necessary for its correct operation, and if
the instructions contained in this manual are not followed.
WARNING: The full content of this manual must be read before any operation. The module must only be used by
qualified electricians. Specific documentation is available via QR-CODE shown on page 1.
Electrical and electronic waste disposal (applicable in the European Union and other countries with recycling).
The symbol on the product or its packaging shows the product must be surrendered to a collection centre
authorized to recycle electrical and electronic waste.
DOCUMENTATION-
T203PM100-MU
SENECA s.r.l.; Via Austria, 26 – 35127 – PADOVA – ITALY; Tel. +39.049.8705359 - Fax +39.049.8706287
CONTACT INFORMATION
Technical support
This document is the property of SENECA srl. Copies and reproduction are prohibited unless authorised.
The content of this document corresponds to the described products and technologies.
Stated data may be modified or supplemented for technical and/or sales purposes.
MI00562-2-EN
INSTALLATION MANUAL
T203PM100-MU
T203PM300-MU
T203PM600-MU
The module must be repaired and damaged parts replaced by the Manufacturer. The product is sensitive to
electrostatic discharges. Take appropriate measures during any operation.
support@seneca.it
INSTALLATION MANUAL
indicates conditions or actions that put the user's safety at risk.
indicates conditions or actions that might damage the
DOCUMENTATION
T203PM300-MU
Product information
DOCUMENTATION
T203PM600-MU
sales@seneca.it
1/4

Advertisement

loading
Need help?

Need help?

Do you have a question about the T203PM100-MU and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Seneca T203PM100-MU

  • Page 1 DOCUMENTATION- DOCUMENTATION DOCUMENTATION T203PM100-MU T203PM300-MU T203PM600-MU SENECA s.r.l.; Via Austria, 26 – 35127 – PADOVA – ITALY; Tel. +39.049.8705359 - Fax +39.049.8706287 CONTACT INFORMATION Technical support support@seneca.it Product information sales@seneca.it This document is the property of SENECA srl. Copies and reproduction are prohibited unless authorised.
  • Page 2 MODULE LAYOUT Dimensions LxHxD 95 x 75 x 35 mm; Weight: ≈ 150 g; Enclosure: PA6, black SIGNALS VIA LED ON FRONT PANEL STATUS LED meaning PWR/COM Green The device is powered correctly PWR/COM Green Flashing Communication via RS485 port D-OUT Yellow Digital output activated ASSEMBLY...
  • Page 3 -600 – +600A / 0 – +1000Vdc T203PM300-MU 0 – 300A / 0 – 290Vac -300 – +300A / 0 – +1000Vdc T203PM100-MU 0 – 100A / 0 – 290Vac -100 – +100A / 0 – +1000Vdc 0 – 10 Vdc, minimum load R =2 kΩ.
  • Page 4 ELECTRICAL CONNECTIONS WARNING Disconnect the high voltage before carrying out any work on the instrument. CAUTION Switch off the module before connecting the inputs and outputs. To meet electromagnetic immunity requirements: - use properly insulated and dimensioned cables; - use shielded cables for signals; - connect the shield to a preferred instrumentation ground;...

This manual is also suitable for:

T203pm300-muT203pm600-mu