Table of Contents
Advertisement
6. OSD (On-Screen Display)
1
12
OSD Display menu
<<MAIN MENU>>
(1) MAIN CONTROL
(2) CAMERA SETUP
(3) TITLE SET
(4) PAN TILT MOTOR
(1) MAIN CONTROL
<1> TITLE
<2> SELECT
<3> SET INDICATE
<4> REMOTE ID
<5> OFF TIMER
The
MENU button is used to turn ON/OFF
12
the OSD display. When the Sub menu is
14
displayed, the screen goes back to the previous
screen.
When the OSD display is available,
direction buttons and
11
function as the menu operation keys.
10
To halt the menu operation and perform the PAN-
13
TILT operation, press
button. To resume the menu operation, press
CURSOR/PAN-TILT button again.
SELECT
SELECT
ON/OFF: To change the ON/OFF of the character in the
bottom of the screen.
PRESET/CAMERA: To change the title to be displayed.
(This setting is enabled only when the above TITLE is ON.)
PRESET: To display preset position names from 1 to 6.
CAMERA: To display the name of the Camera.
ON/OFF: To display the preset position in the screen upon
its registration (for about 2 sec).
1~6: To set the ID No. of the Camera for the selective
operation via the wireless remote control.
If the ID No. is not to be set, set this to "0."
(This has been factory set to "0.")
OFF, 5min, 10min, 30min 1h, 2h, 5h: To set the time for the
Low Power Consumption mode.
If no operation status continues longer than the above set
time, the Camera power will be turned OFF automatically.
To turn ON the Camera power again, press
button. (This has been factory set to "OFF.")
- 19 -
11
CURSOR/PAN-TILT
13
ENTER
(Return to
ADJUST
(Return to
10
HOME button
13
12
MENU )
12
MENU )
POWER
1
Advertisement
Table of Contents
