Rinse Aid - Electrolux Built-In Dishwasher Use & Care Manual

Dishwasher Dispenser & Detergents

RINSE AID

Rinse aid greatly improves drying and reduces water spots and filming. It
causes the water to "sheet" off of dishes rather than form water droplets that cling
and leave spots.
The rinse aid dispenser, located next to the detergent cup, automatically releases a
measured amount of rinse aid during the last rinse. If spotting and poor drying are
problems, increase the amount of rinse aid dispensed by rotating the dial to a
higher number. The dial is located under the dispenser cap.
The indicator turns dark when full and clear when it is time to refill.
On models with a STATUS window, LO displays at the end of the cycle, indicating
that it is time to refill.
To add liquid rinse aid:
1 Turn dispenser cap 1/4 turn counterclockwise and lift
out.
2 Pour in rinse aid until liquid touches the indicated fill
level. Do not overfill since this can cause
oversudsing.
3 Replace cap.
4 Wipe up any spills with a damp cloth.
The dispenser holds enough for 35 to 140 washes,
depending on setting.
19
Dispenser Opening
Adjustable Setting
Dispenser Cap
Indicator