Indicators - Eiki LC-XWP2000 Owner's Manual

Maintenance and Troubleshootin g

Indicators

The Power and Lamp indicators show the status of the projector. Before
requesting repair, check the projector status using the chart below. I f
the problem cannot be resolved contact your dealer.
Power Lamp
(Red)
(Green)
Slow
Off
flashing
On Off
Slow
On
flashing
Fast
On
flashing
Fast
On
flashing
Fast Fast
flashing flashing
Slow Slow
flashing flashing
54
Conditions
Stand by
Projector is ready to be turned on (normal)
mode
On mode Projector is on and operating normally
Cool-down
Projector is in cool-down mode and will not
respond to user input (normal)
mode
The projector has detected a problem with
Fan-fault
an internal fan, the lamp will shut off
mode
automatically, contact your dealer
T h e l a m p c o v e r i s o p e n o r t h e r e i s
Lamp-cover
a problem with the lamp. If the lamp
door is closed and replacing the lamp
open
does not correct the issue, contact your
dealer.
The projector has overheated and shut the
lamp off. Correct the over temp condition
immediately.
High
1. Check that the ventilation slots are free
from obstructions
temperature
2. Check the cleanliness of the air filter.
3. If the condition persists, contact your
dealer
Lamp-fault
The lamp does not light., come back "stand
by mode", and turn on the power button.
mode
Notes