BASIC OPERATION
Press ZOOM L/M button on Top Control or on Remote Control
1
Unit to display a message "Zoom".
Press ZOOM L button to make image larger, and press ZOOM
2
M button to make image smaller.
Press FOCUS L/M button on Top Control or on Remote Control
1
Unit to display a message "Focus".
Adjust focus of image by pressing FOCUS L/M button(s) .
2
1
Press LENS SHIFT button on Top Control or on Remote Control
Unit to display a message "Lens shift".
2
Press POINT UP button to move image up, press POINT DOWN
button to move image down.
If a projected picture has keystone distortion, correct image with KEYSTONE adjustment.
Press KEYSTONE L/M button on Remote Control Unit or select
1
Keystone on SETTING menu (Refer to page 39) to display a
Keystone dialog box.
Correct keystone distortion by pressing KEYSTONE L/M button
2
or POINT UP/DOWN button(s). Press KEYSTONE L button or
POINT UP button to reduce upper part of image, and press
KEYSTONE M button or POINT DOWN button to reduce lower
part.
Reduce upper width with KEY STONE L button or
POINT UP button.
22
ADJUSTING SCREEN
ZOOM ADJUSTMENT
FOCUS ADJUSTMENT
LENS SHIFT ADJUSTMENT
KEYSTONE ADJUSTMENT
Reduce lower width with KEY STONE M button or
POINT DOWN button.
Zoom
Message disappears after 4 seconds.
Focus
Message disappears after 4 seconds.
Lens shift
Message disappears after 4 seconds.