Northern Telecom DMS-100 Series Maintenance Manual page 33

Clearing a PM LCM Minor alarm
Step Action
8 Return the drawer to service by typing
>RTS DRWR drwr_no
and pressing the Enter key. ↵
where
drwr_no is the number of the LSG to be returned to service
(0 to 19)
If the RTS command
passed and the drawer is in
service (.)
passed and the drawer is in
service (.), but there are other
drawers that are either system
busy (S) or manual busy (M)
failed and a card list is generated
failed and a card list is not
generated
9 Repeat steps 5 to 8 for each LSG that is either system busy (S) or
manual busy (M).
10
A card list is generated. Record the locations and PECs, including
suffixes, of the cards on the list.
11 See the chapter titled "Card replacement procedures" in this document to
replace the first card on the list, and return to this point.
(continued)
Do
step 15
step 9
step 10
step 14
-continued-
PCM30 Line Drawer Maintenance Guide BCS33 and up
Alarm clearing procedures 3-7
PM LCM
(continued)
Minor
(continued)