Mapping The Network Drive - D-Link STORAGE DNS-313 User Manual

Setup Utility

Mapping the Network Drive

The Easy Search Utility located on the Installation CD is used to map the DNS-313 to your Windows computer where it appears as a Network
Storage Drive. Follow these steps to map the drive to your computer.
1. Launch the Easy Search Utility from the Installation CD. You will see the DNS-313 in the
Network Storage Device list. If there is more than one D-Link Network Storage device on
your network, they will also be listed.
2. Select the DNS-313 you want to map to your system from the list. Any volumes located on
the drive appear below in the Drive Mapping list. If this is the first time mapping the drive, the
volume name Volume_1 should appear listed.
D-Link DNS-313 User Manual
24