System - D-Link STORAGE DNS-313 User Manual

Configuration

System

Use the System Settings menu to perform a simple device Restart or Shutdown.
This is also where the DNS-313 can be reset to factory default settings. In addition,
you can save and load saved configuration files.
Factory Reset
Click the Restore button under Defaults to restore the network storage drive to the
default settings. The DNS-313 will be reset to the factory default settings and restart.
It will take about 2 minutes. When it restarts, use the default User Name admin with
no password to log back in. The IP settings might change depending on how the IP
settings were previously configured. Upon restarting, the DNS-313 is a DHCP client;
so therefore it might be necessary to use the Easy Search Utility to establish contact.
If you are unable to log in using the same IP address, use the Easy Search Utility to
find the device and connect to it. Restoring factory default settings will not change
any data on the hard disk.
Save or load configuration setting to your local hard drive
Once the DNS-313 is configured it is a good idea to back up the configuration
settings file to your local hard disk. To back up the configuration settings file of the
DNS-313, click on the Save button under Configuration Settings and choose a
location on your computer to store the file. This file can later be loaded from your
computer to use the same configuration settings.
To Load Configuration Settings from a previously saved file on your computer, click
on the Browse button to locate the file, after locating it click the Load button to load
the settings.
Idle Time
Use the Idle Time configuration to set the number of minutes of inactivity allowed
before the user is logged off. The Config Inactivity Timer is used for the web
management administrator activity. If there is no activity using the web manager for
the set period, the administrator is logged off and must log in again to continue using
it. The Download Schedule Inactivity Timer is used for users downloading files.
Users are logged off after the set period of inactivity.
D-Link DNS-313 User Manual
39