Product Overview
Front Panel
D-Link DNS-313 User Manual
Hardware Overview
Drive LED
The LED will be solid
BLUE
when the drive is
connected but inactive. The LED will blink when
the drive is being accessed, formatted, or
synchronized. The LED will be solid
the remaining capacity of the drive is less than 5%.
It will illuminate
RED
if the drive has failed.
Power Button
Push in to power-on the DNS-313. The edges of the
button will be illuminated with
BLUE
when the device is powered on. Press again to turn
off. There is a few seconds delay during both power
on and power off.
Activity LED
The Activity LED will be solid
an Ethernet connection. It will blink to indicate LAN
traffic.
GREEN
when
back lighting
BLUE
when there is
4