WEBTEC HPM110 Operation Manual page 8

Safety instructions
Observe the existing national regulations for accident pre-
vention and safety at work when carrying out any work!
Observe the IP protection class when using the HPM110
in wet areas (& „Technical data" on page 77)!
The HPM110 should only be connected by trained spe-
cialist personnel!
Note the specified tightening torques!
Avoid any violent impacts on the HPM110!
Never use a damaged or defective HPM110!
Never assemble or disassemble the HPM110 while the
HPM110 is under pressure!
Only use the HPM110 in the approved pressure range
(& „Technical data" on page 77)!
8