Yamaha EF2400iS Service Manual page 53

2
1
NOTE:
Turn the magneto rotor until the stator coil
assembly bolts are visible though the holes in
the rotor, and then remove the bolts 1.
NOTE:
Tighten the magneto rotor nut 1 using the
sheave holder 2.
1
3-20
GENERATOR
3. Install:
9 Tubes
9 Stator coil assembly bolts 1
10 Nm (1.0 m · kg, 7.2 ft · lb)
4. Tighten:
9 Washer
9 Magneto rotor nut 1
65 Nm (6.5 m · kg, 47 ft · lb)
Sheave holder:
YS-01880, 90890-01701
ENG