Screen Setup - Dual XDVDN8290 Installation & Owner's Manual

Upon initial installation or
occasionally, the touch screen may
have to be calibrated. Follow these
steps as described.
SCREEN Setup - Touch Screen Calibration
1
Step 1 1) Touch top left corner of screen.
2
Step 2 2) Touch SCREEN icon.
Step 3 & 4 3) Touch No in TS Calibration row.
4) Then touch Yes.
Step 5 & 6
5) Touch and hold the pointers as indicated on the screen for 2 seconds each.
6) Screen will automatically return to MAIN MENU, touch RETURN to exit.
XDVDN8290 XDVDN8290
3
5
OPERATION OPERATION
4
Notes: For proper calibration
you must touch each pointer for
2 seconds. If pointers are not
touched properly, the calibration
sequence will start over until the
calibration is done correctly.
28