Download Print this page
NENKO 21507130 Quick Start Manual

NENKO 21507130 Quick Start Manual

Aura projector

Advertisement

Quick Links

1. Name of the product
Aura Projector
2. Product code
21507130
3. Colour
As pictured
4. Brief description
A projector for decorative use at home in a darkened room. With a suitable brightness for bedrooms
(Nenko projector. LED 100 and LED Projectors are better adapted for the multi-sensory rooms as they
are brighter and at longer distance).
5. Content
1 x Aura Projector
1 x power supply
1 x liquid wheel
1 x table support (foam ring)
6. Sensory stimulation
sight
7. General
Use the product indoors, in a dark environment. Project onto a flat, white or light-coloured and
smooth surface. This projector is best suited for smaller spaces. Use the included effect wheel.
8. Installation
Install the projector
Attach the effect wheel (remove the magnetic adapter if you are using non-magnetic wheels)
Connect the power supply
9. Additional information
The projector has the following features:
Timer
Dimmer
LED lamp (no replacement needed, no heat)
1 Liquid wheel included
Built-in wheel motor
12 volt version can also be used in bathrooms
not to be used with other projector accessories, like prisma, multifacet, deformation
wheels etc.
10. Safety
Always keep an eye on the product when it is in use.
Install the product indoors in a dry environment.

Advertisement

loading

Summary of Contents for NENKO 21507130

  • Page 1 4. Brief description A projector for decorative use at home in a darkened room. With a suitable brightness for bedrooms (Nenko projector. LED 100 and LED Projectors are better adapted for the multi-sensory rooms as they are brighter and at longer distance).
  • Page 2 • Do not use the product if the plug is damaged or if the projector has fallen. 11. Technical information Power supply: 9V AC 6W Size: 20 x 20 x 20 cm Weight: 889 grams 12. Installation 1. Choose a suitable location for the projector so that no one will trip over the power cable, can pull it or hurt by hot surfaces.
  • Page 3 Note: You must turn on the projector to put the wheel motor in the correct position. The opening at the top of the magnet must be facing the top of the projector. To re-attach the magnetic adapter, make sure that the flat side of the axis is facing the top of the projector.
  • Page 4 Do not just try to repair this projector unless you are qualified to do so and you are working under the direction of the manufacturer. • Carefully pull the plug out of the socket to disconnect the product. For more information you can visit www.nenko.com. our website...