Advertisement
Quick Links
1. Name of the product
Aura Projector – Saver Pack
2. Product code
21508130
3. Colour
As pictured
4. Brief description
A projector for decorative use at home in a darkened room. With a suitable brightness for bedrooms
(Nenko LED, 100LED and LED Projectors are better adapted for multi-sensory rooms – brighter and
larger distance.
5. Content
1 x Aura Projector
1 x power supply
1 x liquid wheel
2 x effect wheel
1 x table stand (foam ring)
6. Sensory stimulation
sight
7. General
Use the product indoors, in a dark environment. Project onto a flat, white or light-coloured and
smooth surface. This projector is best suited for smaller spaces. Use the included effect wheel.
8. Commissioning
•
Mount the projector
•
Attach the effect wheel (by use with non-magnetic wheels, remove the magnet adapter)
•
Connect the power supply
9. Additional information
•
The projector has the following features:
•
Timer
•
Dimmer
•
LED lamp (no replacement needed, no heat)
•
Includes 1 x liquid wheel + 2 effect wheels
•
Built-in wheel motor
•
12 volt version can also be used in bathrooms
•
Not to be used in combination with the Panorama rotator, Deformation wheels, Front
prism and Multi-facet mirror.
10. Safety
•
Always use this item under supervision.
Advertisement
Summary of Contents for NENKO Aura Projector Saver Pack
- Page 1 As pictured 4. Brief description A projector for decorative use at home in a darkened room. With a suitable brightness for bedrooms (Nenko LED, 100LED and LED Projectors are better adapted for multi-sensory rooms – brighter and larger distance. 5. Content...
- Page 2 • Install the product indoors in a dry environment. • Do not use the product if the plug is damaged or if the projector has fallen. 11. Technical information Power supply: 9V AC 6W Size: 20 x 20 x 20 cm Weight: 889 grams 12.
- Page 3 Note: You must turn on the projector to put the wheel motor in the correct position. The opening at the top of the magnet must be facing the top of the projector. To re-attach the magnetic adapter, make sure that the flat side of the axis is facing the top of the projector.
- Page 4 Do not just try to repair this projector unless you are qualified to do so and you are working under the direction of the manufacturer. • Carefully pull the plug out of the socket to disconnect the product. For more information you can visit www.nenko.com. our website...