Download Print this page

NENKO 1746013042895111 Manual

Space projector

Advertisement

Quick Links

1. Productname
Space projector
2. Product code
1746013042895111
3. Description
A small projector for small sensory areas, such as at home. Fluid wheel
and motor included. A set with four different coloured liquid wheels is
available separately. Operates on 220 volts, lamp 12 volts.
Please note: the Space projector does not have a fan, so it cannot stay on
for too long due to overheating. The space projector has a lamp that has
2000 operating hours. If the lamp is defective after this number of burning
hours, it is not covered by the warranty
4.Contents
Your Space projector comes complete in 1 box.
1x Space Projector
1x Power adapter
1x Fluid wheel
5. Sense stimulation
Sight
6. Safety
For indoor use only. Always use this product under supervision. This product is not a toy and should
therefore not be used as a toy. Space Projector and Fluid Wheels become hot during use. Do not
point the projector directly at someone / look directly into the lens.
7. Technical Data
The Space Projector is a class III lighting device and withstands all relevant safety requirements -
including EN60598, EN60065 and Electricity Guidelines 73/23 / EEC (Low Voltage)
Input: 240/110 V
Output: 12V
Dimensions: 25cm
8. Installation
Before use
Place the projector indoors on a flat and stable surface. We
recommend placing the projector out of reach, for example on
a high shelf. Place the supplied fluid wheel in the side of the
projector (B). If it is placed correctly, you will hear a clicking
sound. A wheel motor is not required. Plug the transformer
into the projector and the plug into the power outlet. Now
turn on the projector.

Advertisement

loading

Summary of Contents for NENKO 1746013042895111

  • Page 1 1. Productname Space projector 2. Product code 1746013042895111 3. Description A small projector for small sensory areas, such as at home. Fluid wheel and motor included. A set with four different coloured liquid wheels is available separately. Operates on 220 volts, lamp 12 volts.
  • Page 2 Place the transformer upright and ensure that it is free and well ventilated on all sides. Do not place the transformer on a thick carpet. Tips When you place your projector, note the following information. Experiment what the best place is for your projector, with these dimensions in mind: Distance projector to wall: Diameter projection: The greater the distance, the greater and better the projection.
  • Page 3 Turn back the focus lamp (A). Carefully click the base back. Do not mix the screws of the Bulb Clamp and the screws of the 6 screw holes (E), the screws are shorter. When you wish more information, please visit our website ww.nenko.com.

This manual is also suitable for:

17460130