Troubleshooting; Error Codes - Dual XD1225 Installation & Owner's Manual

Problem
Unit will not turn on
(no power)
Unit has power
(but no sound)
Unit blows fuses
Excessive skipping
Unit will not accept
a disc
Error Code
ER-1 appears on display
ER-2 appears on display
ER-3 appears on display
Cause
Yellow wire not connected or incorrect voltage
Red wire not connected or incorrect voltage
Black wire not connected
Fuse blown
Speaker wires not connected
One or more speaker wires touching each
other or touching chassis ground
Yellow or red wire touching chassis ground
Speaker wires touching chassis ground
Incorrect fuse rating
Unit is not mounted correctly
Physical defect in media (CD, CD-R or CD-RW)
CD mechanism position out of alignment
CD transit screws still in place
Cause
Disc error
Mechanism error or disc is in upside down
Servo error
XD1225 OPERATION

Troubleshooting

Check connections for proper voltage
(11~16VDC)
Check connection to ground
Replace fuse
Check connections at speakers
Insulate all bare speaker wires from
each other and chassis ground
Check for pinched wire
Check for pinched wire
Use fuse with correct rating
Check mounting sleeve or add a
backstrap support
Check media for scratches
Press EJECT for 3 seconds to reset
CD mechanism position
Remove 2 transit screws located on top
of the unit.
Error Codes
Press eject or RESET
Press eject or RESET
Press eject or RESET
Action
Action
9