Battery-Lamp; Charging Characteristics - Milwaukee HEAVY DUTY M18 POALC Instructions Manual

TECHNICAL DATA

BATTERY-LAMP

Lighting time with one fully charged battery (5.0 Ah)
Mode 3 High Level .............................................................
Mode 2 Med Level .............................................................
Mode 1 Low Level .............................................................
Luminus fl ux
High Level ..........................................................................
Med Level ..........................................................................
Low Level ..........................................................................
Colour rendering index (CRI).................................................
Colour temperature................................................................
AC-Mode
Voltage ...............................................................................
AC Input .............................................................................
Rated Power Input .............................................................
Charger rated power input .................................................
Charger output ...................................................................
Quick charge current .........................................................
DC-Mode
Rated Power Input .............................................................
Battery voltage ...................................................................
USB Output ..........................................................................
Weight without battery ..........................................................
Weight according EPTA-Procedure 01/2014 (2.0 Ah ...12.0 Ah) ......
Protection class ....................................................................
WARNING Read all safety warnings, instructions,
illustrations and specifi cations provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.
BATTERY LAMP SAFETY INSTRUCTIONS
WARNING Do not direct the light beam at persons or
animals and do not stare into the light beam yourself (not
even from a distance). Staring into the light beam may
result in serious injury or vision loss.
CHARGER SAFETY INSTRUCTIONS
Do not store the battery pack together with metal objects
(short circuit risk).
Only the following battery packs can be charged with this
charger:
Battery Cat. Cell Type DC Volts Capacity
No.
M18B Li-Ion 18 V ≤ 1.5 Ah
M18BX Li-Ion 18 V ≤ 3.0 Ah
M18B2 Li-Ion 18 V ≤ 2.0 Ah
M18B4 Li-Ion 18 V ≤ 4.0 Ah
M18B5 Li-Ion 18 V ≤ 5.0 Ah
M18B6 Li-Ion 18 V ≤ 6.0 Ah
M18B9 Li-Ion 18 V ≤ 9.0 Ah
M18HB3 Li-Ion 18 V ≤ 3.0 Ah
M18HB4 Li-Ion 18 V ≤ 4.0 Ah
M18HB5.5 Li-Ion 18 V ≤ 5.5 Ah
M18HB8 Li-Ion 18 V ≤ 8.0 Ah
M18HB12 Li-Ion 18 V ≤ 12.0 Ah
Do not try to charge non-rechargeable batteries with this
charger.
No metal parts must be allowed to enter the battery section
of the charger (short circuit risk).
Never break open battery packs and chargers and store
only in dry rooms. Keep dry at all times.
Do not touch the tool with conducting objects.
Never charge a damaged battery pack. Replace by a new
one.
14 ENGLISH
M18 POALC
................................................................. 4 h
................................................................. 8 h
............................................................... 12 h
........................................................... 3000 lm
........................................................... 1500 lm
........................................................... 1000 lm
............................................................... 80
........................................................... 4000 K
...................................................... 100-240 V
................................................EU:220-240 V; UK:110V, 220-240V
............................................................. 130 W
............................................................... 80 W
............................................................... 18 V
.............................................................. 3,0 A
............................................................... 45 W
............................................................... 18 V
.............................................................. 5,0 V/2,1A
.............................................................. 5,5 kg
...................................................... 5,9...6,9 kg
................................................................ IP 54
Before use check machine, cable, and plug for any
damages or material fatigue. Repairs should only be
carried out by authorised Service Agents.
This appliance is not intended to
be used or cleaned by persons
with reduced physical, sensory or
mental capabilities, or lack of
experience or knowledge, unless
they have been given instructions
concerning the safe use of the
appliance by a person legally
responsible for their safety. They
Cell
should be supervised whilst using
No.
5 the appliance. Children shall not
2 x 5
use, clean or play with this
5
2 x 5 appliance, which when not in use
2 x 5
should be secured out of their
2 x 5
3 x 5
reach.
5
5
ADDITIONAL SAFETY INSTRUCTIONS
2 x 5
Remove the battery pack before starting any work on the
2 x 5
appliance.
3 x 5
Do not dispose of used battery packs in the household
refuse or by burning them. Milwaukee Distributors off er to
retrieve old batteries to protect our environment.
Do not store the battery pack together with metal objects
(short circuit risk).
Use only compatible Milwaukee chargers from the same
battery platform for charging battery packs. Do not use
battery packs from other systems.
Battery acid may leak from damaged batteries under
extreme load or extreme temperatures. In case of contact
with battery acid wash it off immediately with soap and
water. In case of eye contact rinse thoroughly for at least
10 minutes and immediately seek medical attention.
Warning! To reduce the risk of fi re, personal injury, and
product damage due to a short circuit, never immerse your
tool, battery pack or charger in fl uid or al-low a fl uid to fl ow
inside them. Corrosive or conductive fl uids, such as
seawater, certain industrial chemicals, and bleach or
bleach containing products, etc., Can cause a short circuit.
SPECIFIED CONDITIONS OF USE
The Battery-lamp is intended to be used light independent
use away from mains supply.
Additionally the charger can charge the specifi ed
Milwaukee battery packs.
Do not use this product in any other way as stated for
normal use.
MAINS CONNECTION
Connect only to single-phase AC system voltage as
indicated on the rating plate. It is also possible to connect
to sockets without an earthing contact as the design
conforms to safety class II.
Please use IP54 degree's connection at least when 250V
UK plug connect to the supply.
CHARGING TIME
Battery Cat. No. Volts Capacity Charging Time
approx.
M18B 18 V ≤ 1.5 Ah 30 min
M18B2 18 V ≤ 2.0 Ah 40 min
M18BX 18 V ≤ 3.0 Ah 60 min
M18B4 18 V ≤ 4.0 Ah 80 min
M18B5 18 V ≤ 5.0 Ah 100 min
M18B6 18 V ≤ 6.0 Ah 120 min
M18B9 18 V ≤ 9.0 Ah 180 min
M18HB3 18 V ≤ 3.0 Ah 40 min
M18HB4 18 V ≤ 4.0 Ah 40 min
M18HB5.5 18 V ≤ 5.5 Ah 90 min
M18HB8 18 V ≤ 8.0 Ah 130 min
M18HB12 18 V ≤ 12.0 Ah 210 min
LI-ION BATTERIES
The rechargeable batteries are partially charged. The LED
on the battery indicates the state of charge.
If it is not used for long periods, the rechargeable battery
will switch to the non-operative state.
When fully discqharged the rechargeable battery switches
off automatically (depth discharge not possible).
Under extreme circumstances, the internal temperature of
the battery could become to high. If this happens, the
battery will shut down.
Place the battery on the charger to charge and reset it.
The state of charge can be read by pressing the button on
the rechargeable battery. The battery can be left in the
electric tool while the reading is taken but it must be
switched off at least one minute beforehand (otherwise the
display will be inaccurate). The number of LEDs illuminated
indicates the state of charge. A fl ashing LED indicates a
max. power reserve of 10%.
As a general principle, if the electric tool should fail to work
after inserting the rechargeable battery, then the battery
should be plugged into the charger. The displays on the
battery and charger will then provide information about the
condition of the battery.
In low temperatures work may continue at reduced output.

CHARGING CHARACTERISTICS

After inserting the battery into the reception of the charger
the battery will automatically be charged (red control lamp
is illuminated continuously)
When a hot or cold battery pack is inserted into the charger
(fl ashing red lamp), charging will begin automatically once
the battery reaches the correct charging temperature
(0°C...60°C). The max. charging current is fl owing when
the temperature of the Li-Ion-battery is between 5°C and
40°C.
Charging time varies depending on the battery
temperature, charge needed and the type of battery pack
being charged.
Once the battery is fully charged, the LED on the charger
changes from red to green.
Remove the battery pack from the tool for charging when
convenient for you and your job. Milwaukee batteries do
not develop a "memory" when charged after only a partial
discharge. It is not necessary to run down the battery pack
before placing it on the charger.
As a general practice, it is best to unplug battery chargers
and remove batteries when not in use. No battery pack
damage will occur, however, if the charger and battery pack
are left plugged in.
If the LED fl ashes alternately red/green, then the
rechargeable battery is either not fully pushed in or there is
a fault with the battery or charger. Take the charger and
battery out of use immediately for safety reasons and have
them inspected by a Milwaukee customer service centre
LIGHT INDICATORS
Continuous red Charging
Continuous green Charging is complete
Battery is too hot/cold -
Charging will begin when
Fast fl ashing red
battery reaches correct
charging temperature
Flashing red/ Damaged or faulty battery
green pack
BATTERIES
Battery packs which have not been used for some time
should be recharged before use.
Temperatures in excess of 50°C (122°F) reduce the
performance of the battery pack. Avoid extended exposure
to heat or sunshine (risk of overheating).
The contacts of chargers and battery packs must be kept
clean.
For an optimum life-time, the battery packs have to be fully
charged, after used.
To obtain the longest possible battery life remove the
battery pack from the charger once it is fully charged.
For battery pack storage longer than 30 days:
Store the battery pack where the temperature is below
27°C and away from moisture
Store the battery packs in a 30% - 50% charged condition
Every six months of storage, charge the pack as normal.
ENGLISH 15