Driver Easy Exit And Easy Entry Control; To Open And Close The Hood - RAM 2011 Truck Chassis Cab Owner's Manual

138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Driver Easy Exit and Easy Entry Control

This additional feature provides automatic driver's seat
positioning which will enhance driver mobility into and
out of the vehicle. The seat cushion will move rearward
approximately 2.5 in (60 mm) when the key is removed
from the ignition switch. The seat will move forward
approximately 2.5 in (60 mm) when the key is placed into
the ignition and turned out of the LOCK position. Each
stored memory setting will have an associated Easy Exit
and Easy Entry position. The Easy Exit and Easy Entry
feature may be automatically disabled if the seat is
positioned rearward enough and there is no benefit in
moving the seat any farther rearward.
NOTE: The Easy Entry/Easy Exit feature can be en-
abled or disabled through the programmable features in
the Electronic Vehicle Information Center (EVIC). Refer
to "Electronic Vehicle Information Center (EVIC)/
Customer-Programmable Features" in "Understanding
Your Instrument Panel" for further information.

TO OPEN AND CLOSE THE HOOD

To open the hood, two latches must be released.
1. Pull the hood release lever located below the steering
wheel at the base of the instrument panel.
Hood Release