Advertisement
Table of Contents :
- Installation of a Hybrid Uni-T and Nano Station
- Installation of a Hybrid TakeOff and Nano Station
- Installation of a Wall Connector
- Installation of a Privacy Screen
- TakeOff Surfaces in the Nano Series
Installation Guide
NANO
pg. 1
pg. 2
pg. 3
pg. 4
pg. 5
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Artopex NANO
Summary of Contents for Artopex NANO
- Page 1 Installation Guide NANO Table of Contents : - Installation of a Hybrid Uni-T and Nano Station pg. 1 - Installation of a Hybrid TakeOff and Nano Station pg. 2 - Installation of a Wall Connector pg. 3 - Installation of a Privacy Screen pg.
- Page 2 Use the "N" connector to join 2 Uni-T panels side by side "N" Connector b) Remove the top cap from the Nano screen c) Install the Uni-T brackets in the vertical profile of the Nano screen, being careful to follow the direction of the teeth as in the drawing to the left.
- Page 3 Nano Installation Guide TakeOff Nano Hybrid a) Use the Nano junction plates to join the 2 TakeOff panels side by side. b) Remove the top cap from the Nano screen c) Install the hybrid TakeOff brackets into the vertical profile of the Nano screen, being careful to follow the direction of the teeth as in the drawing to the left.
- Page 4 Take off the top cap of the Nano screen. c) Carefully lower the flat plates into the vertical profile of the Nano screen, screw them in enough just to hold them in place, do not tighten them completely. Position of the...
- Page 5 Before installing the 2nd privacy screen, take off the top cap of the Nano screen, install the post and the connecting strip. Connecting e) Loosen the screw that you will find under the vertical profile strip of the screen and insert the small support plate.
- Page 6 The Nano screens adapt to the TakeOff System, even when the TakeOff surfaces are 3/8" longer than Uni-T and Nano. It is the TakeOff bracket in the Nano system, that allows the Nano screen to be adjusted, so that this screen will cover the full length of the surface.
Need help?
Do you have a question about the NANO and is the answer not in the manual?
Questions and answers