Daily Care - LAVAZZA FLAVIA CREATION 600 User Manual

DAILY CARE

EMPTYING AND CLEANING THE DRIP TRAY
The drip tray is a 3-piece design with the lower part used to collect
spillages or overflows with a spout to make emptying it easy. If the
drip tray is full, spillages will leak from the highlighted area in the next
section. To avoid overflow, please check the drip tray regularly.
Automatic Cup
Lift out and empty drip tray. CAUTION - CONTENTS MAY BE HOT.
1
Lift out the automatic cup stand.
2
Separate all parts of the drip tray and cup stand (Fig1 Page 25 in
3
"RE-ASSEMBLING THE CUP STAND" section and reverse the
procedure).
Hand wash all parts in warm soapy water.
4
Wipe the area underneath and around the drip tray.
5
Reassemble the top and bottom halves of the drip tray.
6
Re-assemble the cup stand (Fig1) and ensuring it is in its lowest
7
position (Fig2), drop the cup stand into the drip tray.
Once reassembled, drop the drip tray back into the base of the
8
brewer and push it gently towards the brewer. Magnets will help lock
it in place. The cup stand will automatically be lifted up and down.
The brewer will then be ready to vend drinks again.
Stand
Drip Tray
Top
Drip
Tray Base
Overflow
USER GUIDE | 23