Advertisement
VERSIONS AVAILABLE
18W Max / 220-240v (1100 Lumens).95 CRI 3000K 35,000 hrs
23W Max / 220-240v (2000 Lumens) 95 CRI 3000K 35,000 hrs
Mounting options include track adaptors, ceiling mount plate, suspension half coupler. For full details contact your Philips
Selecon dealer: www.seleconlight.com/distributors
DIMMING
Local Dimming Version
Fresco LED Wall Washer models with local dimming
CANNOT be installed and run on a dimmed power
supply/track.
If your Fresco LED Wall Washer model includes a local
dimmer, ensure that the dimming knob on the Fresco
LED is at its "Full" position (completely clockwise) to test
fitting.
ACCESSORIES
Barndoor
FRSLEDBD01 (White)
FRSLEDBD03 (Black)
SAFETY AND MAINTENANCE
Keep your Fresco LED Wall Washer in top condition and performing at its best by cleaning it regularly with a soft cloth.
The above is the only maintenance task that can be safely carried out by non-approved personnel.
Philips Selecon has manufactured this luminaire in accordance with recognised best practices to recommended international
safety standards. It is your responsibility to maintain this luminaire in good and safe working condition.
Repairs should only be carried out by suitably qualified persons. Do not operate the luminaire with damaged lamps or
cables, etc. Consult your Philips Selecon distributor for assistance. Only replace damaged parts with authorised Fresco LED
Wall Washer spare parts.
ELECTRICAL INSTALLATION
WARNING!!!
Risk of fire and electric shock. This product is to be installed by a qualified electrician only. This luminaire employs a
grounded type receptacle and is not intended for connection to a two-wire, ungrounded source of supply.
When installing this luminaire use wire conductor colour codes as follows:
Notes:
For ceiling rose models the terminal block is to be covered by suitable insulation tape at time of installation.
Minimum 90C supply conductors to be used.
Track adapter models are only to be fitted to approved and compatible track systems.
LIMITED WARRANTY
Philips Selecon ("Selecon") warrants all Philips Selecon luminaires against defects in materials or workmanship. The term of
this warranty is three years; from the date of delivery, and is dependent on the following operating conditions:
FOR ARCHITECTURAL DISPLAY: the Fresco LED Wall Washer is used as a display light and in conditions typically found
in a museum being 10 to 12 hours daily, 7 days per week.
For full details of the Philips Selecon Warranty, please refer to our website:
Australian customers - please refer to the Australia specific warranty card included with this product.
Brown
Blue
Green/Yellow
Philips Selecon, 19-21 Kawana Street, Northcote, Auckland 0627, New Zealand
Ph: +64 9 481 0100, Fax: +64 9 481 0101
www.seleconlight.com
JULY 2013
© 2013 Philips Selecon All Rights Reserved
Fresco LED Wall Washer models with DALI dimming
control have no local dimmer.
If your Fresco LED Wall Washer model is a DALI version,
refer to your DALI operation manual as provided by your
DALI supplier.
- Phase, Live
- Neutral, Return
- Earth
Manufacturer
DALI Dimming Version
www.seleconlight.com
Advertisement
