Demo Mode - Directed Electronics PYTHON 333 Owner's Manual

Prepare the system
Open
1. a door.
Turn
2. the ignition on.
Press and release then press and hold the control center button.
3.
The control center LED flashes and the siren chirps one time to
confirm the system is prepared.
Release
4. the control center button and proceed below.
Note: Begin pairing within 60 seconds or the system will exit (indi-
cated by a long siren chirp) and will need to be prepared again.
Prepare the remote control
Select the desired Car 1 (Default) or Car 2 operation before proceed-
ing.
Press and hold the
1.
beep is emitted and
operate two systems, confirm the correct car 1 or car 2 text and
beeps at 3 seconds).
2. Release the
displayed.
Press
3. and release the
displayed.
Press and hold the
4.
release it.
Press and hold the
5.
SUCCESS
Note: If
pared and repeat step 5 until successful.

Demo Mode:

Demo mode plays a pre-selected group of animations as a demonstra-
© 2009 Directed Electronics. All rights reserved.
button of the remote control until a long
MAIN MENU
button to view the main menu.
button until
button until the siren emits a long chirp.
is displayed with a sequence of chimes.
is displayed, make sure the system is still pre-
FAILED
is displayed (If programmed to
button two times.
is displayed, and then
PAIR
REMOTE SETUP
PAIR REMOTE
is
is
25