Installation; Placement - Elen B1 Series User Manual

2. Installation

2.1. Placement

UPS Placement
Figure 2.1 UPS Placement
External Battery Cabin Placement
Figure 2.2 External Battery Cabin Placement
Do not install the UPS on an uneven

ground or in outdoors.
Note that ventilation holes on side covers

must not be clogged.
Do not install the UPS in places with liquid

installation or places subject to fire risks.
Do not install the UPS in places where it

will be exposed to direct sunlight or
affected of heat sources.
Heed to minimum distance requirement

between the UPS and nearby walls and/or
devices.
Do not install the UPS in places where it

may be subject to vibration or impacts.
Do not install the UPS in environments

with excessive (too high or too low)
humidity levels.
Do not operate the UPS in dusty or filthy

environments.
Do not leave any materials on or
around the UPS to facilitate and
expedite maintenance and repair
operations.
The UPS may overheat if distance
requirements are not met. Moreover,
this may complicate maintenance and
repair operations.
The UPS must be installed in a room
with restricted access (Authorized
Personnel Only).
 Heed to UPS placement
instructions when placing
the external battery cabin.
Page | 7
B1 10kVA V1.0.1 –