Advanced Settings Interface - Ebyte 8DO User Manual

Chengdu Ebyte Electronic Technology Co.,Ltd.
(3) DO-related
Set the DO function, set the operating mode (level mode, pulse mode, follow mode), set the pulse width (pulse
mode only),power up theDO state (on, off), follow the source (follow the setting DIx).
Note: Multiple switch output DO ends can be set to follow one DI input, not one switch output DO side to follow
multiple DI inputs. Follow mode is limited to DI-enabled devices

6.2.3 Advanced Settings Interface

(1)Device settings
Advanced setup interface, support for device name settings, offset address (software address), read parameters, turn
on write protection, turn off write protection, restart modules, restore factory settings.
Copyright ©2012–2021，Chengdu Ebyte Electronic Technology Co.,Ltd.
Figure 6-2-11 "DO-related"
Figure 6-2-12 Advanced Settings Interface
Figure 6-2-13 Device Settings Interface
【8DO】MA01 -XXCX0080 User Manual
interface
25