Technical Parameters - Ebyte 8DO User Manual

Chengdu Ebyte Electronic Technology Co.,Ltd.

3.2 Technical parameters

category
power supply
Serial
DO output
other
Copyright ©2012–2021，Chengdu Ebyte Electronic Technology Co.,Ltd.
Table 3-2-1 Technical Parameters
name
Operating voltage DC 8 to 28V
Operating current 50mA @12V
The power supply Green LED indication
indicates
Communication RS485
interface
baud rate 1200 to 115200 bps (default 9600 bps)
The data bit 8 (Fixed).
Check bit No checks, parity, parity (default no checks)
Stop bit 1 (fixed).
Communication Modbus RTU protocol
protocol
The device 1 to 247(default address 32: Software 1, hardware 31).
address
The number of 8 way
DO roads
The DO output Type C relay (normally open and normally closed)
type
DO output mode Level mode, pulse mode
Relay contact 30V/10A☆250V/10A
capacity
The output Red LED indication
indicates
Product size 145 mm x 90 mm x 40 mm (W.W.W. High)
Product weight 250g ± 5g
Working -40 to 85 degrees C, 5% to 95% RH (no condensation)
temperature and
humidity
Store temperature -60 to 125 degrees C, 5% to 95% RH (no
and humidity condensation)
How to install it Positioning hole installation, rail installation
【8DO】MA01 -XXCX0080 User Manual
parameter
11