Ma 1 - Automatic Monitor Alignment; Hardware Requirements; Software Requirements; Dsp Loudspeakers (Network-Enabled) - Neumann.Berlin MA 1 Instruction Manual

MA 1 – Automatic Monitor Alignment
This document describes the requirements, structure and alignment procedure for using the
MA 1 Automatic Monitor Alignment v1.4.
This version of the software supports stereo systems with and without subwoofers.

Hardware requirements

•
Loudspeakers
o 1 pair of KH DSP loudspeakers
or
o 1 or 2 KH 750 subwoofer in combination with a pair of KH DSP loudspeakers or with a
pair of analog KH loudspeakers
•
Neumann MA 1 measurement microphone
•
PC or MAC (64 bit)
•
Screen resolution of 1280 × 720 px or higher
•
Audio interface with:
o Balanced analog input with 48 V phantom power
o 2 balanced analog outputs or AES3 output (only with KH 750)
•
Network switch

Software requirements

•
Operating system:
o PC: Windows 10 64 Bit
o Mac: macOS 10.13, 10.14,10.15 and 11
•
MA 1 – Automatic Monitor Alignment software
•
ASIO driver (for Windows)

DSP loudspeakers (network-enabled)

The following loudspeakers and subwoofers are network-enabled and can be controlled directly
by the software:
•
KH 80 DSP
•
KH 750 DSP, KH 750 AES67

Analog loudspeakers (not network-enabled)

The following loudspeakers are not network-enabled and need to be connected via a network-
enabled subwoofer in order to be included in the system setup.
•
KH 120 A
•
KH 120 D
•
KH 310 A
•
KH 310 D
•
KH 420 / KH 420 + DIM 1
MA 1 – Automatic Monitor Alignment | 3