Display Of Measurement Results - Neumann.Berlin MA 1 Instruction Manual

Display of measurement results

After the measurement procedure the system will display the results.
The following curves are displayed:
•
Orange curve:
This shows the room-specific target response used by the system to align the
measurement results.
Please note that this curve is not necessarily ruler flat. The system will create a target
response optimized for the character of the room. This target response depends on
the acoustical behavior of the room, on the distance between the loudspeakers, the
listening position and on the placement of the loudspeakers in the room.
•
White curve:
This curve shows the combined magnitude response of the entire system. It represents
the acoustical result after the alignment.
If you unselect the checkbox you can see and hear the system response with the default monitor
settings.
The combination of all measured loudspeakers/subwoofer with their default settings is shown in
white.
MA 1 – Automatic Monitor Alignment | 24