Installing Logs - Desa CGF280PT Owner's Operation And Installation Manual

INSTALLING
Continued
20

INSTALLING LOGS

Failure to position the parts in accordance with these diagrams or
failure to use only parts specifically approved with this heater may
result in property damage or personal injury.
Each log is marked with a number. These numbers will help you identify the log when
installing. It is very important to install these logs exactly as instructed. Do not modify logs.
Only use logs supplied with heater.
1. Slide front log (#1) into place behind front burner. Make sure tabs at bottom of log are
behind front burner (see Figure 22).
2 . Slide rear log (#2) into place behind rear burner (see Figure 23).
3. Place left front branch (#4) and right front branch (#5) (24" and 30" models) or front
branch (#4) (18" model) into place (see Figure 24). Make sure notches on bottom rest on
grates.
Tab
Figure 23 - Installing Rear Log
WARNING
Front Log (#1)
Figure 22 - Installing Front Log
Rear Log (#2)
Figure 24 - Installing Rear Log
Left Branch (#4)
Right Branch (#5)
102665