Table of Contents
Advertisement
Quick Links
1.0 SAFETY INFORMATION
•
The provision of the electrical supply and the connection of the unit to the mains
must be carried out by a qualified electrician. Ensure that the mains supply (Voltage,
Frequency and Phase) complies with the rating label.
•
Isolate from power supply before removing any covers. During installation /
maintenance ensure all covers are fitted before switching on the mains supply.
•
All-pole disconnection from the mains as shown in the wiring diagram must be
incorporated within the fixed wiring and shall have a minimum contact separation of
3mm in accordance with latest edition of the wiring regulations.
•
This unit must be earthed.
•
Ducting must be securely fixed with screws to the spigot to prevent access to live
parts.
•
If the supply cord is damaged, it must be replaced by its service agent or similarly
qualified persons in order to avoid a hazard.
•
When installing the unit, take care not to damage electrical or other hidden
components – do not drill the unit casing.
•
Precautions must be taken to avoid the back-flow of gases into the room from the
open flue of gas or other fuel-burning appliances.
•
The unit must be installed indoors, and away from direct sources of frost, heat and
water spray or moisture generation. Ambient temperature range -5 to 40 °C.
•
The cooling unit is an electro-mechanical device that contains and uses R134A
refrigerant. Refrigerant weight, 0.4Kg (Maximum).
•
This appliance should not be used by children or persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge, unless they
have been given supervision or instruction concerning the safe use of the appliance
by a person responsible for their safety. Children shall not play with the appliance.
Cleaning and user maintenance shall not be carried out by children. This unit contains
live electrical components, moving parts and refrigerant under pressure. Always site
out of reach of children and protect from vandalism and accidental damage.
Nuaire | Western Industrial Estate | Caerphilly | CF83 1NA | nuaire.co.uk
MR-ECO-COOL-V
MRXBOXAB-ECO5-AE(OH)CV Cooling Module
Installation Manual
10. 12. 21. Document Number 672010
1
Advertisement
Table of Contents
Related Manuals for NuAire MR-ECO-COOL-V
Summary of Contents for NuAire MR-ECO-COOL-V
- Page 1 Always site out of reach of children and protect from vandalism and accidental damage. Nuaire | Western Industrial Estate | Caerphilly | CF83 1NA | nuaire.co.uk 10. 12. 21. Document Number 672010...
-
Page 2: General Warning
Nuaire would always recommend a site specific risk assessment by a competent person to determine if any additional PPE is required. Nuaire | Western Industrial Estate | Caerphilly | CF83 1NA | nuaire.co.uk 10. 12. 21. Document Number 672010... - Page 3 (SUPPLIED) 90.0 DIGITAL ROOM THERMOSTAT (CM-THERM-CONTROL) (SUPPLIED) MVHR UNIT (MRXBOXAB-ECO5-AECV) (AVAILABLE SEPARATELY) MR-ECO-COOL-V ECO5-AE-1Z-STND CONTROLS (AVAILABLE SEPARATELY) (SUPPLIED) Front View (Standard Hand) Nuaire | Western Industrial Estate | Caerphilly | CF83 1NA | nuaire.co.uk 10. 12. 21. Document Number 672010...
-
Page 4: Installation
Keep the unit horizontal during installation and level the unit in its final position. Once in final position, leave unit for a minimum of 4 hours before activation. Nuaire | Western Industrial Estate | Caerphilly | CF83 1NA | nuaire.co.uk 10. 12. 21. Document Number 672010... - Page 5 The drain position will be located towards the front at the bottom of the unit. Nuaire | Western Industrial Estate | Caerphilly | CF83 1NA | nuaire.co.uk 10. 12. 21. Document Number 672010...
-
Page 6: Electrical Installation
Black Volt free Summer / Winter Switch (supplied with ventilation unit) Polarity is inconsequential Warning! - Do not connect to mains! Nuaire | Western Industrial Estate | Caerphilly | CF83 1NA | nuaire.co.uk 10. 12. 21. Document Number 672010... - Page 7 All refrigerant in the unit must be reclaimed and disposed of safely. Nuaire | Western Industrial Estate | Caerphilly | CF83 1NA | nuaire.co.uk 10. 12. 21. Document Number 672010...
- Page 8 Please call After Sales Support for further information on items not listed above. Ensure that Nuaire product is made safe from any electrical / water / refrigerant supplies before dismantling commences. This work should only be undertaken by a qualified person in accordance with local authority regulations and guidelines, taking into account all site based risks.