Philips PR3841 Instructions For Use Manual page 23

, The status indicator on the device lights up solid
Your devices
Cancel , If you do not start the treatment within
Philips PulseRelief
PR3094/00
Product ID: 12345678901234567890
Software version: 12345678901234567890
Forget my device Clear my history
Philips BlueTouch
PR0000/00
Product ID: 12345678901234567890
Software version: 12345678901234567890
Forget my device Clear my history
Add new PulseRelief
Treatment area
Cancel Skip
Rotate to select treatment area
Treatment area
Cancel Skip
Next
Your pain level
Skip
0 5 10
none moderate extreme
Next
All manuals and user guides at all-guides.com
Using the app to start and stop a treatment
1 Turn on Bluetooth on your mobile device.
2 Use the on/off button to set the device to
standby.
green to indicate that the device is in standby
mode and ready for treatment.
5 minutes, the device turns off automatically.
If this happens, you first have to press the on/off
button again to start a treatment.
3 Open the Philips Treatment App.
Selecting a treatment area
At first-time use, you always have to select a
treatment area. If you have used the device before,
you can choose between 'My previous treatment'
to repeat the previous treatment and 'Select new
treatment' to start a different treatment.
1 Rotate the body animation on the screen.
2 Tap on one of the suggested locations for the
electrodes to select the area you want to treat.
Rating your pain intensity
1 Swipe vertically to rate the intensity of your
pain on a scale from 0 to 10. If you experience
no pain tap 0 and if you experience the worst
pain ever tap 10. If your pain is somewhere
in between, rate it by tapping the appropriate
number.
ENGLISH
23