Denon ADV-700 Operating Instructions Manual page 69

6
Setting the timer start time
Set the hours' place to "PM12".
7
Press the TIMER/SET button.
• The "PM12" in the hours' place is
stored in the memory.
8
Set the minutes' place to "35".
9
Press the TIMER/SET button.
• The start time is stored in the memory, and the end time
can now be set.
10
Setting the timer end time
Set the hours' place to "PM12".
11
Press the TIMER/SET button.
• The "PM12" in the hours' place is stored in the memory.
12
Set the minutes' place to "56".
13
Press the TIMER/SET button.
• The end time is stored in the
memory
• "T.Stdby" is displayed and the
timer can now be turned on or off.
14
FUNCTION
/SELECT
Main unit
TIMER/SET
Main unit
FUNCTION
15
/SELECT
Main unit
16
TIMER/SET
Main unit
When the display's
FUNCTION
when the power is in the standby mode, the timer will operate at
/SELECT
the same times every day. (Everyday timer)
If you do not want the timer to operate, press the TIMER/SET
button to display "T.Stdby" and set to "OFF".
(The display's
Main unit If you make a mistake when setting the timer, with steps 5 to 12
press the TIMER/SET button and hold it in for at least 2 seconds to
return to step 3, and start over from there.
NOTES:
• If the current time is not set, the timer standby setting cannot
be set to "ON". Be sure to set the current time before turning
TIMER/SET
on the timer.
• The timer will operate as long as it is turned on, even if the time
Main unit
setting is off due to a power failure. If you want the timer to
operate correctly, be sure the current time is properly set.
• If the timer start time is reached while the power is turned on,
FUNCTION
the set operates as set for the timer. (The timer settings are
/SELECT
given priority.)
• Be sure to set the power to the standby mode to operate the
timer.
Main unit
2 To Listen to the TUNER with the Everyday Timer
• Set "Timer TUNER" in Step 4, then press the TIMER/SET
button.
• "
TIMER/SET
dial to select the preset channel on which you would like to
receive with the timer, then press the TIMER/SET button.
Main unit
• Hereafter, the same procedure is performed from Step 6.
Set the timer standby mode to on or off.
• "ON" or "OFF" (the one that has been selected) flashes.
Select "ON" if you want the timer to operate. (When set
to "ON", the mark appears on the display.)
Select ON/OFF. If an operation is not performed within 4
seconds, the setting will be made automatically and there
will be a return to the normal display. (Operation 15 is not
necessary.)
Press the TIMER/SET button.
• This completes the setting of the
timer.
Turn off the main unit's power.
• The power is set to the standby
mode.
• If the timer standby mode is set to
"ON", the power LED is lit orange.
• The disc starts playing when the
timer start time is reached.
mark is lit or the power LED is lit orange
mark turns off.)
" will be displayed. Use the FUNCTION/SELECT
ENGLISH
FUNCTION
/SELECT
Main unit
TIMER/SET
Main unit
ON / STANDBY
Orange
Main unit
69