Page 1
Instructions Bellevue AJ10 Arne Jacobsen 1929 Congratulations on your new Bellevue lamp designed in 1929 by Arne Jacobsen. We hope you will enjoy using this product and follow these instructions to ensure cor rect installation. If you have any questions...
Page 2
Bellevue AJ10 Please read these instructions carefully and retain them Step 1 for future reference to ensure that the product is used Identify the desired location for the lamp on the table top Arne Jacobsen correctly. For your own safety, please study each step of and mark the middle using a pencil.
Page 3
Step 4 Tighten the nut by turning it in a counter-clockwise direction, using a wrench. Step 5 Install the light bulb. Step 6 Use the flexible swan-neck to set the shade at a desired angle. It is best to set the angle before turning on the lamp as the shade gets hot when the lamp is in use for longer periods at a time.