&Tradition BELLEVUE AJ3 User Instructions

&Tradition BELLEVUE AJ3 User Instructions

Advertisement

BELLEVUE AJ3
by ARNE JACOBSEN
USER
INSTRUCTIONS
andtradition.com
Congratulations on choosing this Bellevue
desk lamp designed in by Arne Jacobsen
in 1929. We hope you will enjoy using this
lamp and follow these instructions to ensure
correct operation. If you have any questions
or comments, please do not hesitate to
contact us by mail on:
info@andtradition.dk

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BELLEVUE AJ3 and is the answer not in the manual?

Questions and answers

Summary of Contents for &Tradition BELLEVUE AJ3

  • Page 1 BELLEVUE AJ3 by ARNE JACOBSEN USER Congratulations on choosing this Bellevue desk lamp designed in by Arne Jacobsen INSTRUCTIONS in 1929. We hope you will enjoy using this lamp and follow these instructions to ensure correct operation. If you have any questions...
  • Page 2 Installation Suggestions: The Bellevue AJ3 desk lamp can be used as a stand alone lighting source or in combination with the other lamps in the Bellevue series. Place it on a work desk, side table, credenza or bedside table.
  • Page 3 The lamp accept standard screw mount bulbs: Maximum 60 W. Tungsten E27 bulb. Maximum 12 W. Low Energy E27 bulb. Use the flexible swan-neck to set the shade at a desired angle. It is best to set the angle before turning the lamp on as the shade gets hot when the lamp is in use for longer periods of time.
  • Page 4 KONGEVEJEN 2. DK-3480 FREDENSBORG. T. +45 39200233 F.+45 39200256 INFO@ANDTRADITION.DK WWW.ANDTRADITION.COM...

Table of Contents