Preparing The Appliance; Building In And Connecting The Appliance - Miele DGC 5080 XL Installation Instructions Manual

DGC 5085 XL

Preparing the appliance

Fitting the inlet hose
Fitting the drain hose

Building in and connecting the appliance

28
Before installing and connecting the appliance, please read
the section "Plumbing in the appliance".
The water inlet hose connection is located on the top
left-hand side on the back of the appliance.
^ Attach the connecting nut of the stainless steel hose to the
screw thread.
Make sure that it has been screwed on tightly.
The water drain hose connection is located on the bottom
left-hand side on the back of the appliance.
^ Attach the hose to the drain connection on the appliance,
and secure it with a hose clip.
^ Connect the mains connection cable to the appliance.
^ Feed the water inlet and drainage hoses through the
cut-out in the base of the housing unit.
^ Push the appliance into the niche, and align it.
Make sure that neither the mains cable nor the water hoses
are trapped or damaged.
The appliance must be positioned level, with a maximum
tolerance of 2°, to allow the steam generator to operate
correctly.