Table of Contents
Advertisement
Key Features
Connectors
Two stimulation output connectors are provided. One is located in each side of the
case. The stimulation lead connectors should be inserted here ensuring positive
engagement in the sockets. When disconnecting the leads, remove the plugs by
holding the plastic body - do not pull the wires.
Battery
A 9V PP3 alkaline non-rechargeable battery or equivalent rechargeable battery
can be used. Ensure that the battery is correctly inserted. Remove the battery
from the stimulator if it is not intended to be used for an extended period.
Low Battery
When the battery nears exhaustion a low battery warning will occur. During an
exercise period the stimulator will automatically reduce the stimulation output to
zero and then bleep and flash the power indicator for approximately thirty seconds.
After this time the stimulator will enter 'sleep' mode and should be switched OFF
before replacing the battery. The 'low battery' warning has been set to provide
optimum usage characteristics for nickel-cadmium rechargeable batteries.
3
17
Advertisement
Table of Contents
