Denon 270 Operating Instructions Manual page 11

(1) Programming (when using the remote control unit)
• Press the PROG/DIRECT button. The
DISC SELECT, number and +10 buttons to select the disc to be
programmed.
For example, to program the 3rd track on the 2nd disc and the 12 track on
the 5th disc, press ,
PROG/DIRECT
and .
+10 2
(2) Programming (when using the buttons on the main unit)
HDCD
1
PCM AUDIO TECHNOLOGY / CD AUTO CHANGER DCM-370
2 TRACK
REMOTE 3
DISC MIN
SENSOR ‚⁄
4
¤ ‚‹ fi‚
5
5 DISC AUTOMATIC DISC LOADING SYSTEM
¢ ON £ OFF
PHONES
• Press the PROGRAM (PROG) button. The
the DISC SKIP, Automatic/Manual search reverse (
Automatic/Manual search forward (
be programmed.
For example, to program the 3rd track on the 2nd disc and the 12 track on
the 5th disc, press the PROGRAM (PROG) button, DISC SKIP button to
select the 2nd disc, Automatic/Manual search reverse (
Automatic/Manual search forward (
then press the PROGRAM (PROG) button.
In the same way, select the 12th track on the 5th disc using the DISC SKIP
and Automatic/Manual search buttons, then press the PROGRAM (PROG)
button.
(3) To Check the Programmed Tracks (Remote control only)
• Press the call button on the wireless remote control unit.
The contents of the program are displayed in order one item at a time each
time the Call button is pressed.
1
( PROG / DIRECT )
2
( DISC SELECT )
4
( 1 ~ 10 )
3
( 1 ~ 5 )
indicator lights. Use the
PROGRAM
, , , ,
DISC SELECT 2 3 DISC SELECT
STOP PAUSE PLAY
REPEAT PROG
1 2 3 4
SEC
5 6 7 8
9 101112
13141516
OPEN/CLOSE DISC SKIP
( PROG )
indicator flashes. Use
PROGRAM
/
8 6
/ ) buttons to select the disc to
7 9
/
8 6
/ ) button to select the 3rd track,
7 9
( CALL )
(4) To Play a Program
HDCD
PCM AUDIO TECHNOLOGY / CD AUTO CHANGER DCM-370
REMOTE
SENSOR
¢ ON £ OFF
PHONES
( 1 PLAY )
• Press the Play ( PLAY) button to play the programmed selections in the
1
order in which they were programmed.
(5) To clear the entire program
,
5
• Pressing the PROG/DIRECT button once more erases the entire program.
Pressing the open/close (
of a program.
• Pressing the PROG/DIRECT button while a program is being played cancels
the program. Play will then be continuous to the end of the disc currently
being played, after which the player will stop automatically.
Cautions
• If a program is run during playing of a track or from the Pause state, the
track which is currently being played becomes the 1st track in the program.
• Direct selection cannot be done while a program is being played. Inputting
the track number of a desired track with the Track Number buttons adds the
),
input track to the end of the program.
• When programming, do not program a track number which is not recorded
on the disc. If such a number is programmed by mistake, the player ignore
the program.
) or
y
To Repeat Play of All Tracks ....................................... Repeat Play
• Press the Repeat (REPEAT) button. The
Steps q and w can be done in any order, with the same results.
※
HDCD
PCM AUDIO TECHNOLOGY / CD AUTO CHANGER DCM-370
REMOTE
SENSOR
¢ ON £ OFF
PHONES
• When the repeat button is pressed once, the
light. In this mode, the track currently playing is repeated.
REPEAT
Track Track
1
REPEAT PROG STOP PAUSE PLAY
2 TRACK
1 2 3 4
3
DISC ‚⁄ MIN SEC 5 6 7 8
4
¤ ‚‹ fi‚ 9 101112
5 13141516
OPEN/CLOSE DISC SKIP
5 DISC AUTOMATIC DISC LOADING SYSTEM
OPEN/CLOSE) button also erases the contents
5
indicator will light up.
REPEAT
1
STOP PAUSE PLAY
2 TRACK REPEAT PROG
1 2 3 4
3
DISC ‚⁄ MIN SEC 5 6 7 8
4
¤ ‚‹ fi‚ 9 101112
5 13141516
OPEN/CLOSE DISC SKIP
5 DISC AUTOMATIC DISC LOADING SYSTEM
1
( REPEAT )
REPEAT and
REPEAT 1
ENGLISH
( 1 PLAY )
2
( 1 PLAY )
1 indicators
Track
11