Advertisement
5. Continue to thread points 4-8. Slip the thread into the middle slot of the
thread guide
. Go over the take up lever
thread into the middle slot of the thread guides
6. Before threading the eye of the needle, make sure the thread is in front of
the thread guide located on the bottom of the needle clamp for the Cover
Stitch or Chainstitch.
7. Thread the eye of the middle needle
8. Draw about 4 inches of the thread through the needle eye, under the
Presser Foot and then towards the back of the machine.
9. Place the thread to the back, under the Presser Foot. Lower foot and sew.
.
Five-Thread Safety Stitch Wide page 16
. Continue by slipping the
and
.
Advertisement
