The Elastic Foot is used for inserting elastic into a seam. It can be used for
swimwear, lingerie and other sewing projects.
Machine Preparation
•
Differential Feed:
•
Needles:
•
•
Upper Knife:
•
Stitch Length:
•
Foot:
Sewing Instructions
•
Set the needles at the highest position
•
Raise the presser foot
•
Loosen screw (2), which will allow the brake (1) to be raised
•
Insert the elastic tape (3) into the foot under the brake and run it through to the back of the foot
•
Tighten screw (2); the more you tighten, the more pressure will be added to the brake (1),
causing the elastic to stretch even more
•
Lay the seam under the presser foot, lining up the fabric to sew a 5/8" seam
•
Lower the presser foot and begin to sew
•
When seam is complete, continue to sew over the elastic for approximately 1 to 2 inches. Cut
elastic and remove from machine.
ELASTIC FOOT
Set to "N"
Use both the right & left needle for wider elastic, right needle for narrow
elastic
Engaged
Set to 3 or 4
Attach (snap-on) elastic foot
Additional Presser Feet page 3