Instrument and control functions
Clutch lever
1
5
1. Clutch lever
The clutch lever is located on the left
side of the handlebar. To disengage
the clutch, pull the lever toward the
handlebar grip. To engage the clutch,
release the lever. The lever should be
pulled rapidly and released slowly for
smooth clutch operation.
The clutch lever is equipped with a
clutch switch, which is part of the start-
ing circuit cut-off system. (See page
5-20.)
EAU31642
Shift pedal
1
ZAUE4466
1. Shift pedal
The shift pedal is located on the left
side of the motorcycle. To shift the
transmission to a higher gear, move
the shift pedal up. To shift the trans-
mission to a lower gear, move the shift
pedal down. (See page 7-3.)
5-13
EAU12876
Quick shifter
The quick shifter allows for full-throttle,
clutch lever-less, electronically-assist-
ed upshifts. When the shift switch de-
tects motion in the shift pedal (page
5-13), engine power and drive torque
are momentarily adjusted to allow the
upshift to occur.
TIP
The quick shifter operates when
traveling at least 20 km/h with an
engine speed of 2000 r/min or
higher, and only when accelerat-
ing.
It does not operate when the
clutch lever is pulled.
EAUN3570