Spectrum Industries 68205 Instructions

Instructions:
Instructions:
To purchase parts or accessories, please contact us at To purchase parts or accessories, please contact us at
www.spectrumfurniture.com www.spectrumfurniture.com
1-800-235-1262
1-800-235-1262
Thank you for choosing Spectrum products! Thank you for choosing Spectrum products!
(4) 052605 (1) 025039
(4) 052605 (1) 025039
1/4-20 x 15mm JC Bolt 4mm Hex Wrench
1/4-20 x 15mm JC Bolt 4mm Hex Wrench
Before you begin, please make sure all parts and proper quantities are Before you begin, please make sure all parts and proper quantities are
included. Any parts damaged during shipment must be reported within included. Any parts damaged during shipment must be reported within
15 days of receipt. To report information regarding damages or if you 15 days of receipt. To report information regarding damages or if you
have any questions, please call 1-800-235-1262. have any questions, please call 1-800-235-1262.

1. Bracket Installation

1. Bracket Installation
A. Before installation, assemble and attach the lower (29"H) wall filler panels, equipment A. Before installation, assemble and attach the lower (29"H) wall filler panels, equipment
racks and any end-support or mid-support legs. The adjacent wall filler panel will
racks and any end-support or mid-support legs. The adjacent wall filler panel will
need to be attached to the 36" equipment rack before the bracket is installed. need to be attached to the 36" equipment rack before the bracket is installed.
B. Align the bracket with the (2) mounting holes in the side of the 36"H equipment rack as B. Align the bracket with the (2) mounting holes in the side of the 36"H equipment rack as
shown. Figure 1. shown. Figure 1.
C. Attach with (2) 1/4-20 x 15mm JC Bolts, and tighten securely. C. Attach with (2) 1/4-20 x 15mm JC Bolts, and tighten securely.
29" Wall Filler Panel
1/4-20 x 15mm
JC Bolt
36" Equipment Rack
Stepped-Height
Bracket
Figure 1
Stepped-Height Bracket for Stepped-Height Bracket for
Instructor Media Console Instructor Media Console
#68205
#68205
4mm Hex Wrench (included) 4mm Hex Wrench (included)
1/4-20 x 15mm
JC Bolt

Tools Required:

Tools Required:
0109103X Page 1 of 2