Dyson AM07 Dissambly Instruction
Bladeless fan
Hide thumbs
Also See for AM07:
- Operating manual (16 pages) ,
- Operating manual (12 pages) ,
- Operating manual (12 pages)
Advertisement
Quick Links
Dyson AM07 Bladeless Fan Disassembly for Cleaning and Maintenance
by rakone3
The instructable illustrates steps needed to strip and
clean the internal parts of the Dyson AM07 bladeless
fan, speci cally the parts exposed to the air ow that
are frequently coated and clogged with dust, greatly
reducing the performance and e ciency of the fan, as
well as making it noisier.
Supplies:
T8 Torx screwdriver (star)
Dyson AM07 Bladeless Fan Disassembly for Cleaning and Maintenance: Page 1
instructables
Prying tool, or alternatively a athead screwdriver
Optional T10/T12 torx screwdriver
Vacuum cleaner
Bristle brush
Advertisement
Related Manuals for Dyson AM07
Summary of Contents for Dyson AM07
- Page 1 Vacuum cleaner well as making it noisier. Bristle brush Supplies: T8 Torx screwdriver (star) Dyson AM07 Bladeless Fan Disassembly for Cleaning and Maintenance: Page 1...
- Page 2 As the ring is ultrasonicaly welded, it is not possible to open in further without permanently damaging it. Clean by rinsing the ring well by spraying a jet of water THROUGH THE AIR OUTLET SLIT, to avoid clogging the air outlet holes. Dyson AM07 Bladeless Fan Disassembly for Cleaning and Maintenance: Page 2...
- Page 3 Unscrew the single T8 torx screw. Gently pry the snap lock nearest to the screw and lift up the retainer. The entire motor-turbine assembly can now be lifted o the housing. Dyson AM07 Bladeless Fan Disassembly for Cleaning and Maintenance: Page 3...
- Page 4 Step 3: Dissassemble Blower Assembly Unscrew the FOUR torx screws on top of the stator. the assembly should open with ease. (no snap- t locks). Vacuum and clean away any visible dirt. Dyson AM07 Bladeless Fan Disassembly for Cleaning and Maintenance: Page 4...
- Page 5 Step 4: Clean the Rotating Impeller Dyson AM07 Bladeless Fan Disassembly for Cleaning and Maintenance: Page 5...
- Page 6 Remove the bottom sponge and clean any visible dirt inside the housing with the aid of a vacuum cleaner. A bristle brush coupled with a vacuum cleaner will be an e ective way of cleaning the air intake holes. Dyson AM07 Bladeless Fan Disassembly for Cleaning and Maintenance: Page 6...
- Page 7 When I was finished the fan sounded, functioned, and even smelled like new. Dyson AM07 Bladeless Fan Disassembly for Cleaning and Maintenance: Page 7...
- Page 8 I never need to disassemble anymore since. I just need to change this filter once every few weeks. Dyson has obsoleted the AM07 and try to sell the one that came with Hepa Filtration at a much higher price. With this method, you get the same filtration with the same AM07. Just sharing.
- Page 9 Anyway, I went ahead to applied some UHU glue on the nut. The F02 Error is now gone Thanks for the post. I’m trying to fix a whirring/ loud fan sound on my Dyson Pure Cool Link Tower. Unfortunately I cleaned out everything, even though it’s was pretty clean in there once I opened it up.