Table of Contents
Advertisement
Controls and Lights
Link light
Link integrity light
Power
DC adapter:
Wattage
Voltage
Backup battery
Physical
Height
Width
Depth
Weight
System Setup
Overview
Use system setup as follows:
•
To change the system configuration information after you add, change, or remove any hardware in
your computer
•
To set or change a user-selectable option such as the user password
•
To read the current amount of memory or set the type of hard drive installed
Before you use system setup, it is recommended that you write down the system setup screen
information for future reference.
NOTICE:
Unless you are an expert computer user, do not change the settings for this program. Certain changes
can make your computer work incorrectly.
Entering System Setup
1 Turn on (or restart) your computer.
2 When "Enter Boot Menu" is displayed, press <Del> to enter (or <F1> to enter from reinstall), or
<F2> to continue.
54
Appendix
solid yellow light indicates network connection
orange off — 10 Mb operation
orange light — 100 Mb operation
65 W
automatic selection power supplies — 100 to 240 V at 50/60 Hz
3-V CR2032 lithium coin cell
7.5 cm (2.95 inches)
27.0 cm (10.63 inches)
22.5 cm (8.86 inches)
3.6 kg (7.93 lb)
Advertisement
Table of Contents
