5. Loosen the four captive screws on the primary hard drive (HDD0).
6. Slide the primary hard drive (HDD0) towards the back using the pull tab and
lift the primary hard drive out of the computer base.
2
1
1
primary hard drive
2 pull tab
CHAPTER 4: INSTALLING ADDITIONAL OR REPLACEMENT COMPONENTS
40
3
3
captive screws (4)
7.
Loosen the four captive screws on the secondary hard drive (HDD1).
8. Using the pull tab, lift the secondary hard drive (HDD1) out of the computer
base.
1 2
1
secondary hard drive
2 pull tab
3
3
captive screws (4)