Sony AC-80MD Instructions For Use Manual page 27

Overview
This AC adaptor is designed for use with
Sony medical equipment only.
For details on connecting and using this
unit, refer to the manual for your equipment.
Note
Do not install this equipment in a confined
space, such as a bookshelf or similar unit.
Location and
Function of Parts
and Controls
A LED lamp
Lights when the power is on.
B AC IN connector
Connect the AC power cord.
C DC connector
Connect the DC cable to the DC
connector of the medical equipment.
Caution
Connect the DC connector to the equipment,
and then connect the AC power cord of the
AC adaptor.
When disconnecting the DC connector,
disconnect the AC power cord of the AC
adaptor before disconnecting the DC
connector.
Do not touch the patient and the pin of the
DC connector at the same time.
The pin of the DC connector applies a
voltage of 24 V, which may harm the
patient.
Overview / Location and Function of Parts and Controls
11
GB