Manitowoc CNF Series Installation

Ice Machine
Installation Checklist
MANITOWOC RECOMMENDS A FACTORY AUTHORIZED SERVICE COMPANY OR DISTRIBUTOR AUTHORIZED SERVICE
DEALER FOR INSTALLATION.
Section 2 (Installation) of the Installation, Operation and Maintenance manual must be followed to ensure proper
installation steps are completed. Read the manual thoroughly before operating, installing or performing maintenance on
the equipment.
Please refer to our website: https://www.manitowocice.com/ for training videos, warranty registration, factory authorized service locator and additional service literature.
For Technical Support: 844-724-2273 or IceService@welbilt.com
For Sales and Marketing Support: 800-545-5720 or IceCustomerCare@welbilt.com
Top Back
Sides
Subject: CNF Model Countertop Model Ice Machines
COUNTERTOP MODELS
1. Confirm the Model and
Serial number match
the specification.
• Model and serial tag can
be found on the rear
panel or inside next to
the ice bin.
2. Has the ice machine
been installed where
ambient temperatures
will remain in the range
of 45° - 110°F?
3. Have minimum
clearances around
the ice machine been
met as stated in the
Installation, Operation
and Maintenance
manual?
MANITOWOC ICE MACHINE DIVISION
2110 SOUTH 26TH STREET, MANITOWOC, WI 54220
WWW.MANITOWOCICE.COM
4. Have all electrical and
water connections
been completed per
the guidelines in the
Installation, Operation
and Maintenance
manual and meet local,
state and national code
standards?
5. Is the electrical supply
on a dedicated circuit?
6. Has the supply voltage
been tested and
confirmed against the
rating on the model/
serial tag?
Document Number: MII_SB_0047 11/20
844-724-CARE
1 of 2