To Connect The Wlan Cartridge (Delivered As Accessory); Configuration; Overview: Configuration; To Access The Most Used Commands - Daikin EKHWET90BAV3 Installation Manual

D
D
a Booster heater power supply cable
b Field wiring
6.3.3 To connect the WLAN cartridge (delivered
as accessory)
[D] Wireless gateway
1 Insert the WLAN cartridge into the cartridge slot on the user
interface of the indoor unit.
WARNING
In order to keep IPX3, the rubber part must be correctly
fixed after WLAN installation.
7

Configuration

7.1

Overview: Configuration

This chapter describes what you have to do and know to configure
the system after it is installed.
NOTICE
This chapter explains only the basic configuration. For
more detailed explanation and background information,
see the installer reference guide.
Why
If you do NOT configure the system correctly, it might NOT work as
expected. The configuration influences the following:
▪ The calculations of the software
▪ What you can see on and do with the user interface
How
You can configure the system via the user interface.
▪ First time – Configuration wizard. When you turn ON the user
interface for the first time (via the unit), the configuration wizard
starts to help you configure the system.
EKHWET90~120BAV3
R32 Split series – Domestic hot water tank
4P680074-1 – 2021.11
▪ Restart the configuration wizard. If the system is already
▪ Afterwards. If necessary, you can make changes to the
X8M
Accessing settings – Legend for tables
You can access the installer settings using two different methods.
However, NOT all settings are accessible via both methods. If so,
the corresponding table columns in this chapter are set to N/A (not
applicable).
Accessing settings via the breadcrumb in the
home menu screen or the menu structure.
To enable breadcrumbs, press the
in the home screen.
Accessing settings via the code in the
overview field settings.
See also:
▪
▪
7.1.1
To change the user permission level
You can change the user permission level as follows:
Installer pin code
The Installer pin code is 5678. Additional menu items and
installer settings are now available.
Advanced user pin code
The Advanced user pin code is 1234. Additional menu items for the
user are now visible.
configured, you can restart the configuration wizard. To restart the
configuration wizard, go
Configuration wizard. To access Installer settings, see
"7.1.1 To access the most used
configuration in the menu structure or the overview settings.
INFORMATION
When the configuration wizard is finished, the user
interface will show an overview screen and request to
confirm. When confirmed, the system will restart and the
home screen will be displayed.
Method
settings" [ 4 14]
"To access the installer
"7.5 Menu structure: Overview installer

To access the most used commands

1 Go to [B]: User profile.
B
User profile
2 Enter the applicable pin code for the user permission
level.
▪ Browse through the list of digits and change the
selected digit.
▪ Move the cursor from left to right.
▪ Confirm the pin code and proceed.
Installer
5678
7 Configuration
to Installer settings
commands" [ 4 13].
Column in tables
#
For example: [5.5]
button
Code
For example: [6-0D]
settings" [ 4 17]
—
Installation manual
13
>