Table of Contents
Advertisement
New in R4
DRAG COUNT
when doing the drag effect. Drag is initiated by holding the saber down and holding the aux button when running.
Setting the value to zero (0) disables the feature so that the lockup is used even when holding the saber down.
New in R4
CLASHSHADE
color; lower values make it more static like the defined color. Recommended is sixteen (16) for clash.
CLSHWAITLEN
– Amount of time (in milliseconds) after a clash before a blast/clash/swing can interrupt.
BLOCKLEN
– Length of time (in milliseconds) to hold the button before it is registered as a lockup.
5.5.5. BLAST
The blast tab contains the color settings for the clash color, along with specific settings for the blast effect. See
5.5.3 BLADE
for more details on how to set colors.
C1BLSTC, C2BLSTC, C3BLSTC –
– Enables the new drag feature and defines how many LEDs from the top will light up
– Defines the color variance for the clash effect. Higher values allow more variance in the
Figure 24 – Screen shot of the blast settings in the NEC Editor.
Use together to set the color during the blast effect.
Page | 32
Advertisement
Table of Contents
